ANYCUBICWash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 Saturn LCD/SLA/DLP 3D Printer

Se compró con la impresora en conjunto y hasta el momento ha funcionado sin ningun problema, espero que siga así por mucho tiempo.

Me sirvió perfecto para curar las impresiones en resina que hago, lava muy bien y es compacta para poner en un buen lugar sin que ocupe mucho espacio

El producto me llegó en buena condicion

Worth the price, it’s quick and quiet

This is roomier and more versatile than Anycubic's smaller unit, that's for sure. Two levels with the optional flexible UV curing station combined with the wash station. Both are obviously bigger, but the way that you can handle larger prints is night and day. The noise is minimal and the alert when the unit has finished a cycle is at a good volume. Not too loud, not too quiet. I have two issues/suggestions for future models 1) put the power button on the front or in an easy to reach location instead of in the rear of the unit. 2) I love the unit, but I have to deduct a point for this: the seal on the wash container lid does not stay in place. At all. Every time you use it, you must wind it back into the grooves for placement. I'm not sure if it can be or should be glued in place or not. If anyone has any insight, please let me know.

works fantastic, we'll packaged and got here quick

I never understood the importance of having a dedicated wash and cure station until now. To save cost I used to wack around my prints in a solo cup and leave them out in the sun to cure, but now my out look on life is completely different.The anycubic wash and cure station was easy to setup, essentially just plug and play. The tub allows me to wash not only my print but my buildplate as well. This prevents my print from warping in any way. The curing station also comes with an overhead lamp which allows you to focus more UV on areas that typically wouldn't recieve as much.This machine is extremely quiet and intuitive to use. Once you plug it in, all you have to do is select the feature you want to use, turn the knob to set the time, and press the knob to start it. All in all, 10/10 machine. I went from waiting a whole day to cure my print in the sunlight to a mere 30 minutes, increasing my workflow. I would definitely recommend this to anyone who needs to turn out prints asap, or really anyone who wants their prints to look as best as possible!

Although I'm pretty adept at FDM printing, I'm very new to resin (SLA) printing. I knew when I decided to dive into SLA that I would want a nice setup for washing and curing my prints. I also wanted something that looked good too. I didn't just want a cardboard box with a light over it.I originally couldn't justify the price of the AnyCubic Wash & Cure, so I scoured Amazon for parts to make my own "nice looking" cure station. By the time I found a setup I liked, I realized that I was almost spending just as much, so I went ahead and bought the AnyCubic.Honestly, I'm glad I did. This thing makes washing and curing so easy it's worth the price. I set it up on my workstation with a silicone mat and some paper towels and I was in business. All I have to do is throw my build plate into the AnyCubic and the machine washes both my print AND my build plate (bonus). I also have the option of setting the print in the provided basket and washing it that way too. Once it's done washing, I set my print on a paper towel, dry it off, swap out the container for the platform on the AnyCubic and set it to cure.PROS:* Can be used with just about any resin printer. It works just as well with my QIDI Shadow as it does for AnyCubic's resin printers. If you have a super large print (like something that could be printed on the S-Box or the Saturn) you would likely have a problem with the size, but most prints will fit in this machine.* Comes with extras that allow you to wash on or off the build plate.* Seriously easy to use.* Timer options. 2, 4, and 6 minutes. For both washing and/or curing.* Stop button so you can stop mid-wash or mid-cure if needed* Excellent washing. I mean it, this sucker creates a tornado. It gets in those hard to reach spaces. And it changes spin direction halfway through the wash.* Safety - it only works when the lid is on. So you don't have to worry about being blinded by UV light if you accidentally start it without the lid on (ask me how I know)* Can handle any liquid. I've used IPA, Mean Green, Simple Green, and Denatured Alcohol. It works great with all of them. (Denatured Alcohol works the best for me.)* Looks and feels great. It has a minimal foot print and can easily be placed next to the resin printer on an IKEA Lack table (you FDMers out there know what I mean, right?) It's also solid. It doesn't feel like cheap plastic. Not even the lid.* They have their own Facebook Group with active AnyCubic employeesCONS:Not a lot, to be honest, but if I had to list any...* Longer time options. Maybe a 10 or 12 minute option added.* Fingerprints, ammIright?* I'd love for it to be a tad bigger. Or hopefully have AnyCubic offer another larger-sized station. I plan to eventually upgrade to a larger resin printer, but I'm hoping someone (*cough*AnyCubic*cough*) will come out with a good super-sized wash and cure station first.* Additional containers. I'd love to have a second container to rinse my prints without having to swap out the liquid (they are already offering this in the Facebook group, and hopefully will be easily available on Amazon soon).All-in-all I highly recommend it. It's worth it. It really is.