🚀 Elevate Your Prints with Anycubic's Pro 2 Resin!
The ANYCUBIC ABS-Like Resin Pro 2 is an upgraded 8K 3D printer resin designed for enhanced strength and toughness, featuring low odor, high precision, and wide compatibility with various LCD and DLP 3D printers. With a 1kg capacity, it minimizes printing failures and distortion, making it ideal for structural and prototype parts.
J**E
Sweet specs for a Great price!
Awesome performance, adhesion is spot of and the final product is super detailed. I would put the detail on this right below Aqua Gray 8k, leaving this as an excellent value for the money. Super easy to set up on my Photon Mono 10k and some of the best print speed I've experienced so far, not to mention it's super tough!
S**.
Very beginner friendly
Wonderful product. I have been printing for six months and have had very little printing errors when switching to this resin. The thin parts of minis have a little flex to them but they keep their shape. This is also the cheapest resin I can find. Like some people have mentioned the resin does start to separate if left in the tank. However stirring it brings it back together.
R**.
A huge improvement over the original Tough Resin
I love this stuff! Every part I print comes out perfect, no failures, dimensional accuracy is perfect, I can print a part with this and another on my Bambu Labs P1S filament printer and the two will bolt together flawlessly. Low odor, good durability, virtually no warping.
A**O
Great resin, works reliably with proper settings
This resin works very well, especially compared to others I’ve tried. I’m using it with my resin printer (Halot-Mage Pro), and it delivers clean, detailed prints. I set the exposure time to 1.6 seconds per layer, and everything turns out great.
K**O
Great resin for the price
In the past, I used to use Phrozen ABS and Sunlu ABS like resins but Phrozen was too expensive and SunLu - too thick and viscous. I usually ended up thinning the SunLu with the Phrozen to get it to the viscosity that I wanted.Anycubic ABS Pro 2 - is much better than their other legacy resins. I tried Anycubic in the past and well - it didn't work.The parts in my model are all printed in the Gray ABS Pro 2. It washes off easily with IPA (99%). However, the dye does stain the IPA which is more or less expected. The parts are durable and have some flex to them. I've dropped parts from workbench height onto a cement floor and no problems.Sanding and finishing is easily done.At this price where it's currently <$20/bottle, you can't beat it. I use this resin almost exclusively.I will say that in terms of speed, this resin is NOT the fastest. When I use my Phrozen+SunLu blend, I print at about 2.15 to 2.25 sec/layer. For PURE ABS Pro 2, I had to bump it up to 2.35 to 2.4 sec/layer. Not much but is is technically a bit slower. But I have 7 resin printers running and I really do like and would recommend this resin.
J**.
Less brittle than standard resins
while it is still brittle, it will give more before shattering than standard resin. In no way is it like ABS in terms of toughness, but definitely better than standard materials. Frankly this is what "standard" resin should behave like. Would love a more ABS like material TBH. Will buy again.
M**A
Fairly Outstanding
I just got a new Mono F7 Max and upgraded my Photon M3 Max to acf from fep film. Between the film and the Pro2 Resin both printers are now printing about twice as fast as I've historically been able to print with the V1 resin on FEP. Also, having tested 15 or so different print/resin combinations, the original formula (and Elegoo's) are prone to failure at faster speeds on both printers, while the Pro2 prints beautifully on both. The only issue I've seen with the Pro2 is it has some potential for layer adhesion failure when your lift speed is too high or your build plate is too crowded. I slowed my lift speed (OK so now I'm only printing 1.8X faster) and it has all but eliminated it. Otherwise I'm blown away by the results this resin has enabled.
S**Y
Easy to use with great results. Very durable.
Favorite resin so far. Since switching from the standard anycubic resin I haven't a single failed print. This stuff is consistent and provides great print quality.I make DnD figures for different groups, some with kids. Kids are hard on figures. This resin holds up to the challenge and is very durable.
Trustpilot
1 day ago
2 weeks ago