Ferric Chloride for PCB etching (500 gm)
Thumbnail 1

Ferric Chloride for PCB etching (500 gm)

4.0/5
Product ID: 222499507
Secure Transaction

Details

  • Brand
    Ases
  • Item Weight
    500 Grams
  • Molecular weight
    162.2
  • Package Information
    Jar
  • Manufacturer
    Ases
📦Sealed for freshness
🔬High-quality FeCL3
⚗️500g of precision

Description

🔧 Etch Your Ideas into Reality!

  • PERFECTLY PACKAGED - Comes in a secure plastic jar.
  • COMPACT CONVENIENCE - Dimensions: 9 x 4 x 4 cm for easy storage.
  • NO BATTERIES REQUIRED - Just pure etching power at your fingertips!
  • QUALITY YOU CAN TRUST - Crafted by Ases for reliable results.
  • UNLEASH YOUR CREATIVITY - Transform your PCB designs with ease!

Ferric Chloride for PCB etching is a high-quality 500 gm solution, packaged securely in a plastic jar. Manufactured by Ases, this reliable etching agent (FeCL3) is perfect for DIY electronics enthusiasts and professionals alike, ensuring precision and quality in every project.

Large manufacture image 1Large manufacture image 2Large manufacture image 3
Small manufacture image 1Small manufacture image 2Small manufacture image 3Small manufacture image 4

Specifications

BrandAses
ManufacturerAses
Country of OriginIndia
Number of Memory Sticks1
Item Weight500 g
Package Dimensions9 x 4 x 4 cm; 500 g
Item part numberASS_0909
Are batteries included?No

Have a Question? See What Others Asked

what is the mixing ratio for pcb etching?
what is the water mixing ratio for pcb etching and approximate time for copper removal?

Reviews

4.0

All from verified purchases

P**R

Good Ferric Chloride powder for PCB Etching.

Good quality Ferric Chloride. My PCBs have come out clean and fast. Good packing and pricing.

S**K

Very strong chemical.

Ferric chloride very strong dry powder. No humidity in content good quality.

S**E

Good quality

Value for money getting good price to weight ratio, and the quality of product is also good.

.**.

not fast pcb etching,bad quality

notfast pcb etching bad quality

A**

Works well for PCB etching

Bought 500 gms ASES for Rs 260.00. Made some test PCB s using another reviewer' s ( Zotin) recommendations . Dissolved 50 gms in 140 ml carefully for etching. The copper completely dissolved in 12 to 13 minutes.Haven't used any other product, so cannot compare with other products.For my requirement, works well and it is reasonably priced.Packing was good.Used FR4 one sided 3inX3in PCB.Use gloves and safety glasses when processing.

M**.

प्रयोग किस तरह करना है ये भी लिखा होना चाहिए ,और कितने पानी में कितना फेरिक क्लोराइड मिलना चाहिए,

फेरिक क्लोराइड के इस डब्बे में प्रयोग किस तरह करना है ये भी लिखा होना चाहिए ,और कितने पानी में कितना फेरिक क्लोराइड मिलना चाहिए,

T**A

Good

Work like a charm..that's all I need to say

Z**.

Guide for beginners

I'm not in a position to review this particular product because my order was cancelled during last year's lockdown. However, since beginners are often at a loss about how to prepare and use ferric chloride for etching PCBs, here's a brief guide.There is no exact formula for the ratio of ferric chloride to water for PCB etching. With nearly 50 years of experience behind me, I've found that a ratio of 375 grams of FeCl3 to 1 litre of water works very well. If you want to mix the whole 500 gm in one go, use about 1.3 litre of water.If you want to prepare only a small amount of etchant and don't have the means to take precise measurements, take out a quarter from the 500gm bottle and dissolve it in two full teacups of water. If you etch only small PCBs at a time, you can reuse the solution many times.WARNING:1. The solution will get VERY hot when you first prepare it. Ordinary glass or thin plastic containers (like a mineral water bottle) may burst from the heat. Use something like a plastic bowl or jug.2. Do not use metal containers. FeCl3 will etch and corrode them.3. FeCl3 stains skin and cloth.4. FeCl3 is extremely hygroscopic and readily absorbs moisture from the air. Close the lid after you have taken out the amount you're going to use.Other hints:The raw copper-clad board must be perfectly clean before etching. Even a fingerprint will prolong the etching time.Place the board face up in the solution. Keep rocking the vessel (but be careful not to splash the liquid).After etching, flush the board thoroughly with water so that no trace of the solution remains.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
€ 21.05

Duties & taxes incl.

Italystore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Ferric Chloride For Pcb Etching 500 Gm | Desertcart Italy