ELEGOO Water Washable 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing 1000Gram Ceramic GreyCarbonfree Certified

1st the most important was almost no oder in the room. It says low oder but you only smell it a bit with teh lid off. Compaired to the plant base witch smelled . Even with the exhaust fans. the printer is vented out side with a small exhauset fan as well as a room exhaust fan. Still take all the percautions. as far as srinking. i found was not to pull the supports off. clean it let it dry. The supports help reduce the shrinking. Then if the supports done come off easy i just use a bit of warm water for a few seconds and they come off easy. let it dry some more then cure it.the detail is perfect. A bit brittle if not carfull . but for models withch are easy to break anyway its fine.and for the price its a great deal if you buy teh 3000 kg package.

Love the water washable resin, so nice to not have to use alcohol for cleaning, works great!

Love working with this resin, have reordered it multiple times. Parts come out looking so soft and smooth without any sanding. The beige color almost has a skin like translucency to it. Really easy to push it to different skin tones with a little bit of resin dye. Keep in mind the color with appear lighter/whiter after curing. It technically is water washable, but i would recommend using a cleaner like simple green to make sure the parts are thoroughly washed, or they will cure with a white cloudily surface that will need to be sanded off. I found that curing submerged in a glass helps with color consistency and preventing the color from lightening too much while curing. Pretty good value for such a high quality resin.

Works well, this resin leaves prints a little more brittle than the others.

I am new to resin printing. I have had a FDM printer for a long time now. I was concerned for a long time about dealing with the resin. The cost of having to have a lot of alcohol on hand, the odor, and keeping everything clean was concerning to me. Decided to try the washable resin to see how it did. I was initially concerned that this would be inferior to regular resin and although easier to deal with, would create worse prints or be more fragile than regular resin. I am glad to say my fears have been unfounded.The prints so far have come out fantastic and with great detail. I have had a few issues, but that was due to support layout (learned my lesson about using the autosupport function in my slicer, it isn't close to enough supports).The cleanup has been a breeze with just water. I also got a small ultrasonic cleaner. Works so great with just plain water. I found that a 3 step cleaning process gets all the lose resin off. I use a pickle bin first to rinse it right from the printer to get the heavy stuff off. I swish it in basket for 10 seconds or so. I then remove the supports and put in the ultrasonic cleaner and run that for 4 minutes. I change the water and run again for another 4 minutes. After that I let air dry and then cure when fully dry. That process took some trial and error. My first prints I just washed in the pickle jar and was getting a heavy white powdery stuff on the print. Did some googling and determined I wasn't cleaning enough. I then used the ultrasonic and it got better but not perfect. That is when I did the second wash with clean water and then fully air dried the pieces before curing and now I get perfect prints with no powdery stuff on the outside. I also don't have to do a lot of manual scrubbing that I don't have time for. I figure the cost of the ultrasonic cleaner is definitely offset by the fact that I don't need any isopropyl alcohol at all. Which is good because that stuff stinks up my shop when I use it.Speaking of odors, the resin does have a slight odor. You can smell it and it has a distinct odor, but I don't think it is strong at all and so far has not been a problem which is good because I can be sensitive to odors. With the lid closed on my printer and the bottle closed, I don't smell anything. Only when pouring new stuff in the vat do I smell something and then it quickly dissipates.

The resin prints with great detail and the build is sturdy. Depending on the size or thickness of the desired print it can turn out flexible or sturdy. Decent price for the product will be purchasing more colors.

Nice service, very fast delivery and all was as description.