2015-2023 Mustang Ecoboost Spoiler Compatible with Mustang V6/V8/Shelby/GT/EcoBoost Coupe 2 Door Models GT 350 GT500 Style ABS Trunk Rear Spoiler Wing

Pros: it looks exactly like the pictures.Cons: the sticky stuff comes in a thin ass roll and it kind of sucks at its job- if you don't have a GT, you'll have to drill holes in your trunk (which is whatever, there's a bunch of videos on youtube)- the "instructions" consist of 4 picturesTip: use gift wrapping tape to tape pieces of paper over every area with holes you need (I did 1 on each side and both middles). Poke or draw the holes so you see where they are. Place the spoiler on the trunk, where it sits flush, and transfer the papers to the car using painters or crafting tape. That way, you know exactly where you need to drill holes.Tip #2: use a screw to etch in a little dot. Then a 1/8th drill bit to make the initial holes. Then use a step bit to drill those holes bigger (I did to 7/32nd)

loved it. took a while to install but overall great

The spoiler looks amazing on my 2017 Ford Mustang V6 and I love it. Unfortunately, the screws were not good quality at all and the adhesive tape was not 3M tape. Furthermore, the instructions consisted of four pictures that weren’t very helpful.Tip: If you get this product especially if you have the same car, it will look nice and chances are you will be satisfied. However, I would strongly suggest getting better screws and actual 3M tape. Also, you will need to make your own template and you will need to drill 8 holes on the top deck lid and 4 on the underside (there will be 6 total on the underside) - (there were already 2 holes as a part of the car) to be able to successfully thread the screws and tighten them, but be very careful as it can be a tight space to work with. To drill the holes on the top deck lid I used a 1/4” drill bit and I used a step bit for the underside, along with an automatic center punch to help center the drill bit for all the holes. I hope you enjoy it if you purchase this product and I hope this helps! Good luck!

Good nice looks good after installing

Came missing instructions,Missing bolts....Missing screws...

The media could not be loaded. Was a little anxious about this spoiler fitting right and matching color of car. 2016 v6 mustang in shadow black. Bought the gloss black version and matched up perfectly! Holes matched up to the original holes on the car. Was impressed with the quality and finish on this spoiler. Came with screws and tape for installation. Very Happy with this purchase!!

A gift for my father's car and he installed in less than 20 minutes. His Mustang looks amazing.

They gave the product and the screws and adhesive. I was expecting to do it myself but the instructions was literally a page with 4 pictures on it. No suggested tools to use, how to possibly line up the spoiler easier etc. if you never done it before like me. I’d recommend getting some strong paper to put on the back of the spoiler to mark the holes. Lightly tape the paper on the wing. And then line up the wing to the trunk once it’s even and flush. Make sure the paper is long enough to tape onto the trunk and tape good that way you can pull the wing off the trunk and the paper still be on the trunk with holes marked out. Only way I can think of getting the holes properly marked without messing up the alignment. If I had just a tad bit more info on the spoiler that they could give would’ve gave them 5 starts other than that it’s a good product could suggest getting more or better adhesive as well