Gifts for Men,Damaged Screw Extractor Set-Christmas Stocking Stuffers for Men Adults Him,Mens Gifts for Dad,Husband,Stripped Screws Nuts & Bolts Drill Bit Tools for Easy Removal of Rusty Broken Screw

This worked perfectly... I was attempting to switch the license plates on my car, and what was a 5-minute job ended up taking forever. The screws didn't have any way to put a socket around them, all I really had to work with was the Phillips head which was disintegrating. Sold to fix this problem I purchased these, followed the directions that came with them and they worked beautifully. I was able to back all of those screws out with minimal effort. I of course replaced them with brand new ones so hopefully this problem won't happen again however if it does, I have these purchased to assist me in the future. I mean even if you don't think you need these and you're just scrolling around looking at random stuff on Amazon, for the price, you should buy them because you never know when you're going to try to remove a screw from something and it's going to be difficult. Having this in your arsenal ready to go is just going to make you happy in the long run.

My 4 wheeler brake fluid reservoir lid had three stripped screws. I ordered the screws and the stripped screw removal kit. In five minutes I had those screws out and they worked like a charm. I highly recommend this set for stripped out screws. Very easy to read instructions plus a nice case to hold them.

Not sure yet the durability, but it was good to be able to pick up this variety of sizes.Hopefully we don't need these too often.Love that they come in a tidy storage case.

I spent an hour trying all kinds of “hacks” to get a stripped bolt out before I broke down and bought this extractor set. Once it arrived, I had the bolt out in under a minute. Well worth the money and I’m sure this will save me lots of future headaches!

I was skeptical about these when I saw how small they are but they worked like a champ. Got the screw out of the picatinny rail on the first attempt.

I have an old Toyota Tacoma that I have been working on. I was removing one of the fenders when a small mounting screw head snapped off, leaving the remainder of the screw in the frame. I soaked the remaining bit of the screw and the hole with PB Blaster for a week, hitting it with spray at least once and sometimes twice a day.I felt like today was as good a day as any to try to get the screw out. I again soaked the remaining bits with PB Blaster, wiped away the excess, and attempted to sink the drill side of the #1 extractor bit into the screw. It spun, but had no impact. Not wanting to potentially snap off the bit, because I know how fragile they are, I switched to a left handed drill bit that was the same size as the #1 bit in the kit. After the hole was started and I saw that I was going in straight, I switched back to the drill side of the extractor bit and got it to sink into the hole, down to the stop on the bit collar. I flipped the bit over and attempted to extract.Using a drill on a slow speed, making sure not to put too much force behind it, I saw that the bit wasn't extracting, instead it was grinding away the metal stem of the screw. I applied slightly more pressure and saw that it was just grinding away more of the stem. I stopped with the #1 and switched to the #2 bit. This time to make sure that I wasn't going too fast, I used a 1/4 inch collar/guide on the bit and fit the other end of the guide onto an Allen wrench. Applying minimal pressure and turning about a quarter turn at a time, I finally got the #2 bit to bite. The bit was down inside the screw and decent amount. Since the #1 hadn't extracted and instead ground away some screw material, the #2 was seated really well in the screw body.Now with extractor seated and biting, hardly applying pressure, I pressed the allen wrench slightly to the left, and that's all she wrote.Now the extractor bit is buried in the screw, making the job infinitely harder since you can't drill through it.I read that a grinding bit in a dremel should be able to grind the extractor bit down and hopefully cause it to crumble. I just destroyed one grinder bit trying to get through it.Now I am looking at buying another "rescue bit" to remove the extractor bit that is broken off in the screw. I should have just left hand drilled the screw out as best I could. This thing is more of a headache than it's worth.

Helpful when needed the most.For small stuck screws, use a sharp self-tapping screw as a point chisel for starting the hole for the drilling part.

Well I bought them to remove my old deck screws. The product did not work. But to be fair the old screws were in terrible shape. Some of the screws were practically disintegrated. I followed the instruction reversed drilled then reversed screwed but they just turned and caught no material. Probably should return them but for $10 it’s not worth it. AGAIN MY SCREWS were badly weathered so maybe in a different situation they might have helped.